CASTROL ANVOL PE 46 B

Castrol Anvol PE 46 B is suitable for use in hydraulic systems where, in the event of leakage or pipe fracture, there is risk of fire and where water containing fluids are unsuitable due to temperature limitations or other reasons. It is specifically designed for use in the electro-hydraulic governor control systems of team turbines, including systems using fine tolerance servo valves. Castrol Anvol PE 46 B was developed to eliminate service problems in high pressure systems resulting from spool valve erosion/corrosion - fluid leakage and loss of response - by possessing the properties known to minimize this effect, notably high resistivity, low chlorine content and a high level of fluid cleanliness. Physical properties such as foaming, air release and demulsibility are also carefully controlled within turbine manufacturers’ specified limits.

Meets the requirements of major OEMs such as General Electric, Siemens, Mitsubishi Hitachi Power Systems and Alstom.

Meets requirement of FM Global against Standard 6930 for ‘Less flammable hydraulic fluids ’.

Meets the requirements of ISO Standard 12922 and ASTM D4293 for HFDR-type fire-resistant hydraulic fluids.